Field observations of C2 and C3 organosulfates and insights into their formation mechanisms at a suburban site in Hong Kong.

Organosulfates (OSs) are formed from volatile organic compounds (VOCs) and their oxidation products in the presence of sulfate particles. While OSs represent an important component in secondary organic aerosol, the knowledge of their formation driving force, mechanisms, and environmental impact remain inadequately understood. In this study, we report ambient observations of C2-3 oxygenated VOCs derived OSs (C2-3 OSs) at a suburban location of Hong Kong during autumn 2016. The C2-3 OSs, including glycolaldehyde sulfate (GS), hydroxyacetone sulfate (HAS), glycolic acid sulfate (GAS), and lactic acid sulfate (LAS), were quantified/semi-quantified using offline liquid chromatography-mass spectrometry analysis of aerosol filter samples. The average sum concentration of C2-3 OSs was 36 ng/m3. Correlation analysis revealed that sulfate, surface area, and liquid water content were important factors influencing C2-3 OS formation. Online measurement with an iodide High-Resolution Time-of-Flight Chemical-Ionization Mass Spectrometer (HR-ToF-CIMS) coupled with the Filter Inlet for Gases and AEROsols (FIGAERO) was also conducted to monitor C2-3 OSs, and their potential oxygenated VOC precursors in both gas- and particle-phase, and aerosol acidity tracer simultaneously. Our measurements support that glycolaldehyde/glyoxal, hydroxyacetone, glycolic acid/glyoxal, and lactic acid/methylglyoxal are likely precursors for GS, HAS, GAS, and LAS, respectively. Additionally, we found strong correlation between C2-3 OSs and H3S2O8-, a marker for aerosol acidity, providing field observational evidence for acid-catalyzed formation of small OSs. Based on both online and offline measurements, acid-catalyzed formation mechanisms in particle/aqueous phase are proposed. Specifically, the unique structure of adjacent carbonyl and hydroxyl groups in the C2-3 oxygenated VOC precursors can facilitate the formation of (1) a five-member ring intermediate via intramolecular hydrogen bond to react with sulfur trioxide through heterogenous reaction or (2) cyclic sulfate intermediate via particle-phase reaction with sulfuric acid to generate C2-3 OSs. These proposed mechanisms provide an alternative pathway for the liquid-phase production of C2-3 OSs.

Molecular characterization and optical properties of primary emissions from a residential wood burning boiler.

Modern small-scale biomass burners have been recognized as an important renewable energy source because of the economic and environmental advantages of biomass over fossil fuels. However, the characteristics of their gas and particulate emissions remain incompletely understood, and there is substantial uncertainty concerning their health and climate impacts. Here, we present online measurements conducted during the operation of a residential wood-burning boiler. The measured parameters include gas and particle concentrations, optical absorption and chemical characteristics of gases and particles. Positive matrix factorization was performed to analyze data from a high-resolution time-of-flight chemical ionization mass spectrometer (HR-ToF-CIMS) equipped with a filter inlet for gases and aerosols (FIGAERO). Six factors were identified and interpreted. Three factors were related to the chemical composition of the fuel representing lignin pyrolysis products, cellulose/hemicellulose pyrolysis products, and nitrogen-containing organics, while three factor were related to the physical characteristics of the emitted compounds: volatile compounds, semi-volatile compounds, and filter-derived compounds. An ordinal analysis was performed based on the factor fractions to identify the most influential masses in each factor, and by deconvoluting high-resolution mass spectra fingerprint molecules for each factor were identified. Results from the factor analysis were linked to the optical properties of the emissions, and lignin and cellulose/hemicellulose pyrolysis products appeared to be the most important sources of brown carbon under the tested burning conditions. It is concluded that the emissions from the complex combustion process can be described by a limited set of physically meaningful factors, which will help to rationalize subsequent transformation and tracing of emissions in the atmosphere and associated impacts on health and climate.

Indoor ozone/human chemistry and ventilation strategies.

This study aimed to better understand and quantify the influence of ventilation strategies on occupant-related indoor air chemistry. The oxidation of human skin oil constituents was studied in a continuously ventilated climate chamber at two air exchange rates (1 h-1 and 3 h-1 ) and two initial ozone mixing ratios (30 and 60 ppb). Additional measurements were performed to investigate the effect of intermittent ventilation ("off" followed by "on"). Soiled t-shirts were used to simulate the presence of occupants. A time-of-flight-chemical ionization mass spectrometer (ToF-CIMS) in positive mode using protonated water clusters was used to measure the oxygenated reaction products geranyl acetone, 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA). The measurement data were used in a series of mass balance models accounting for formation and removal processes. Reactions of ozone with squalene occurring on the surface of the t-shirts are mass transport limited; ventilation rate has only a small effect on this surface chemistry. Ozone-squalene reactions on the t-shirts produced gas-phase geranyl acetone, which was subsequently removed almost equally by ventilation and further reaction with ozone. About 70% of gas-phase 6-MHO was produced in surface reactions on the t-shirts, the remainder in secondary gas-phase reactions of ozone with geranyl acetone. 6-MHO was primarily removed by ventilation, while further reaction with ozone was responsible for about a third of its removal. 4-OPA was formed primarily on the surfaces of the shirts (~60%); gas-phase reactions of ozone with geranyl acetone and 6-MHO accounted for ~30% and ~10%, respectively. 4-OPA was removed entirely by ventilation. The results from the intermittent ventilation scenarios showed delayed formation of the reaction products and lower product concentrations compared to continuous ventilation.

Secondary organic aerosol reduced by mixture of atmospheric vapours.

Secondary organic aerosol contributes to the atmospheric particle burden with implications for air quality and climate. Biogenic volatile organic compounds such as terpenoids emitted from plants are important secondary organic aerosol precursors with isoprene dominating the emissions of biogenic volatile organic compounds globally. However, the particle mass from isoprene oxidation is generally modest compared to that of other terpenoids. Here we show that isoprene, carbon monoxide and methane can each suppress the instantaneous mass and the overall mass yield derived from monoterpenes in mixtures of atmospheric vapours. We find that isoprene 'scavenges' hydroxyl radicals, preventing their reaction with monoterpenes, and the resulting isoprene peroxy radicals scavenge highly oxygenated monoterpene products. These effects reduce the yield of low-volatility products that would otherwise form secondary organic aerosol. Global model calculations indicate that oxidant and product scavenging can operate effectively in the real atmosphere. Thus highly reactive compounds (such as isoprene) that produce a modest amount of aerosol are not necessarily net producers of secondary organic particle mass and their oxidation in mixtures of atmospheric vapours can suppress both particle number and mass of secondary organic aerosol. We suggest that formation mechanisms of secondary organic aerosol in the atmosphere need to be considered more realistically, accounting for mechanistic interactions between the products of oxidizing precursor molecules (as is recognized to be necessary when modelling ozone production).

Fresh and Oxidized Emissions from In-Use Transit Buses Running on Diesel, Biodiesel, and CNG.

The potential effect of changing to a nonfossil fuel vehicle fleet was investigated by measuring primary emissions (by extractive sampling of bus plumes) and secondary mass formation, using a Gothenburg Potential Aerosol Mass (Go:PAM) reactor, from 29 in-use transit buses. Regarding fresh emissions, diesel (DSL) buses without a diesel particulate filter (DPF) emitted the highest median mass of particles, whereas compressed natural gas (CNG) buses emitted the lowest (MdEFPM 514 and 11 mg kgfuel-1, respectively). Rapeseed methyl ester (RME) buses showed smaller MdEFPM and particle sizes than DSL buses. DSL (no DPF) and hybrid-electric RME (RMEHEV) buses exhibited the highest particle numbers (MdEFPN 12 × 1014 # kgfuel-1). RMEHEV buses displayed a significant nucleation mode ( Dp< 20 nm). EFPN of CNG buses spanned the highest to lowest values measured. Low MdEFPN and MdEFPM were observed for a DPF-equipped DSL bus. Secondary particle formation resulting from exhaust aging was generally important for all the buses (79% showed an average EFPM:AGED/EFPM:FRESH ratio >10) and fuel types tested, suggesting an important nonfuel dependent source. The results suggest that the potential for forming secondary mass should be considered in future fuel shifts, since the environmental impact is different when only considering the primary emissions.

Online Chemical Characterization of Food-Cooking Organic Aerosols: Implications for Source Apportionment.

Food-cooking organic aerosols (COA) are one of the primary sources of submicron particulate matter in urban environments. However, there are still many questions surrounding source apportionment related to instrumentation as well as semivolatile partitioning because COA evolve rapidly in the ambient air, making source apportionment more complex. Online measurements of emissions from cooking different types of food were performed in a laboratory to characterize particles and gases. Aerosol mass spectrometer (AMS) measurements showed that the relative ionization efficiency for OA was higher (1.56-3.06) relative to a typical value of 1.4, concluding that AMS is over-estimating COA and suggesting that previous studies likely over-estimated COA concentrations. Food-cooking mass spectra were generated using AMS, and gas and particle food markers were identified with filter inlets for gases and aerosols-chemical ionization mass spectrometer (CIMS) measurements to be used in future food cooking-source apportionment studies. However, there is a considerable variability in both gas and particle markers, and dilution plays an important role in the particle mass budget, showing the importance of using these markers with caution during receptor modeling. These findings can be used to better understand the chemical composition of COA, and they provides useful information to be used in future source-apportionment studies.

A pervasive role for biomass burning in tropical high ozone/low water structures.

Air parcels with mixing ratios of high O3 and low H2O (HOLW) are common features in the tropical western Pacific (TWP) mid-troposphere (300-700 hPa). Here, using data collected during aircraft sampling of the TWP in winter 2014, we find strong, positive correlations of O3 with multiple biomass burning tracers in these HOLW structures. Ozone levels in these structures are about a factor of three larger than background. Models, satellite data and aircraft observations are used to show fires in tropical Africa and Southeast Asia are the dominant source of high O3 and that low H2O results from large-scale descent within the tropical troposphere. Previous explanations that attribute HOLW structures to transport from the stratosphere or mid-latitude troposphere are inconsistent with our observations. This study suggest a larger role for biomass burning in the radiative forcing of climate in the remote TWP than is commonly appreciated.